Click image to view full size image
1. Equipment Application
It is mainly designed for aging of aluminum alloy and tempering of small sized metal parts like castings, coils, plates, tubes, and non-ferrous parts. It is equipped with electrical control system, which is more flexible, more accurate and high robust with automatic alarm function. Mechanical movement of the furnace are interlocked; with help from circulating fan, temperature uniformity can reach ≤±5ºC.
2. Supply Scope
3. Main Technical Parameter
It is mainly designed for aging of aluminum alloy and tempering of small sized metal parts like castings, coils, plates, tubes, and non-ferrous parts. It is equipped with electrical control system, which is more flexible, more accurate and high robust with automatic alarm function. Mechanical movement of the furnace are interlocked; with help from circulating fan, temperature uniformity can reach ≤±5ºC.
2. Supply Scope
|
No. |
Item |
Qty |
| 1 |
Furnace Body |
1 set |
| 2 |
Hot Air Circulating Fan |
2sets |
| 3 |
Heating Elements |
1set |
| 4 |
Air Duct and Guide Flow hood |
1set |
| 5 |
Furnace Door and Lifting Unit |
1set |
| 6 |
Door Tightening Unit |
1set |
| 7 |
Door Device |
1set |
| 8 |
Trolley and Seal Device |
1set |
| 9 |
Electrical Control System |
1set |
3. Main Technical Parameter
|
NO |
Item |
Data |
|
| 1 |
Effective Size of Furnace Chamber |
2500×1800×1400mm(××) | |
| 2 |
Rated Voltage |
380V |
|
| 3 |
Frequency |
50Hz | |
| 4 |
Maximum Temp. |
250ºC | |
| 5 |
Rated Heating Power |
220KW | |
| 6 |
Heating Zone |
2 | |
| 7 |
Heating Up time with full loaded |
≤3h(400ºC) | |
| 8 |
Temp. Uniformity |
±5ºC | |
| 9 |
Temp. Control Accuracy |
±1ºC | |
| 10 |
Temp. Control Method |
PID | |
| 11 |
Controller for Heating Elements |
Silicon Controlled Rectifier |
|
| 12 |
Temp. Controller |
Japan |
|
| 13 |
Instruments Accuracy |
0.1 | |
| 14 |
Paperless Recorder |
Fuji |
|
| 15 |
Thermocouple |
K K-type |
|
| 16 |
Thermocouple Grade |
Grade one |
|
| 17 |
Material of Heating Elements |
Stainless Steel Pip |
|
| 18 |
Circulating Fan Power |
~11KW×2=22KW | |
| 19 |
Lifting Motor Power |
1.5Kw | |
| 20 |
Door lifting speed |
8m/min | |
| 21 |
Trolley Driven power |
1.5KW | |
| 22 |
Trolley Moving Speed |
6m/min | |
| 23 |
Lining Type |
Full Fiber Lining |
|
| 24 |
Compressed Air Pressure |
0.5~0.7MPa | |
| 25 |
Compressed air Consumption |
≤0.5m3/ | |
| 26 |
Fan Noise |
≤80Bb | |
| 27 |
Skin Temp. |
Ambient + ≤35ºC | |
| 28 |
Door surface Temp. |
≤45ºC | |
| 29 |
Total Installed capacity |
290KW | |
| 30 | |||
|
Φ630mm, 200KG, 500mm , 100kg 300-350kg,580mm 130kg Coil Type : Φ630mm,200kg, 500mm , 100kg, Φ710mm, 300~350 kg, 580mm, 130kg. Maximum load : 18 coils. |
|||